Search Forum
Blog Entry# 721942
Posted: Apr 13 2013 (17:33)
6 Responses
Last Response: Apr 15 2013 (03:21)
6 Responses
Last Response: Apr 15 2013 (03:21)
I have seen most of the cr trains runs on wam 4 or wap4 or wap 7 .
But wap5 is rearly seen in cr trains why it is like this
But wap5 is rearly seen in cr trains why it is like this
2 Posts
same in technical aspect except the HP
WCAM 2/2P - 3780 DC / 4720 AC
WCAM 3 - 4600 DC / 5000 AC
WCAM 2/2P - 3780 DC / 4720 AC
WCAM 3 - 4600 DC / 5000 AC
which 1 is the advance and better in terms of speed and overall performance
wcam 2p is better with speed with max. speed 120km/h in AC mode whereas 110 km/hr (AC) in wcam 3.
CR uses WCAM-3 locos on Mumbai-Pune and Mumbai-Igatpuri sections which have ghat portions as well as speed restrictions of about 100km/h.
wcam 2p are used by WR for fast trains, running at up to 120km/h on the Virar-Godhra AC section (Mumbai-Virar is DC but has reduced speeds because of the suburban traffic).
CR...
more...
CR uses WCAM-3 locos on Mumbai-Pune and Mumbai-Igatpuri sections which have ghat portions as well as speed restrictions of about 100km/h.
wcam 2p are used by WR for fast trains, running at up to 120km/h on the Virar-Godhra AC section (Mumbai-Virar is DC but has reduced speeds because of the suburban traffic).
CR...
more...
I have seen and travelled by many trains i have seen that most of the trains were hauled by wcam3 after igatpuri for eg jabalpur garibrath,allahabad duranto etc. This jabalpur garibrath was running with max 105 speed towards bhusawal.
i wonder that how this trains will cover up the distance since wcam3 can go upto max 110 on ac.
i wonder that how this trains will cover up the distance since wcam3 can go upto max 110 on ac.